Quick Basket

You have 0 products (£0.00) in your basket.

You have 0 products (£0.00) in your basket.

Manufacturers
Categories

Milliput Superfine White Putty - 4oz Pack

Milliput Superfine White Putty - 4oz Pack
Click image above to enlarge.

Milliput Superfine White Putty - 4oz Pack

  Milliput Superfine White is a versatile putty which adheres to and will seal or bond metals, wood, plastics, glass, ceramics and even cement. We have found that Milliput is an ideal putty for modifying your grip to better suit your hand. This is a 4oz pack.

Milliput has a storage life of approximately 2 years providing it is stored in cool, dry conditions. Place unused epoxy putty in polythene bags and re-seal. Storage at high temperatures or high humidity may reduce shelf life.

Milliput is a two part epxoy, once equal quantities of each stick have been mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25 deg C) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted.

How to use:

Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. the putty may now be applied and will set hard in three to four hours without shrinking.

At all stages from initial mixing to final setting Milliput responds to the use of water. To aid manipulation and avoid sticking, fingers and tools should be kept moistened with water. There are certain instances when work may be carried out in a gentle stream of water under a tap. To obtain a smooth finish, mould or apply Milliput and then immediately wipe and smooth gently with wet finger or with a fine textured moist cloth.

When tools have been used for applying or contouring Milliput they should be cleaned immediately after use. If the putty is allowed to harden on it will be almost impossible to remove.

In the putty state Milliput, like most chemicals in domestic use, may cause irritation to sensitive skins. When mixing the two components it is advisable to use rubber gloves or throw-away polythene gloves. When rubber gloves have been used wash them immediately after use, and whilst still on the hands, using running water. If the hands have been used for mixing or manipulating Milliput wash them immediately after use with toilet soap and warm water.

Colouring Milliput:

There are a number of ways of colouring Milliput.

Powder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used.

Liquid colourings, like enamel paints, oil paints, spirit based-dyes or pigments can also be used to colour Milliput, but liquids or pastes may be difficult to introduce into the putty, again small quantities should be used, to avoid creating a very wet mix that may be difficult to mix.

In all cases the Milliput should be thoroughly mixed by rolling & folding about 30-35 times. This will ensure that all the hardener has come in good contact with the resin and the Milliput will then set correctly.

Instructions can be found here

Stock Status: Usually in Stock

View more products from " Compound Spares / Accessories"
View more products from "Bows"
View more products from "Compound Bows"
View more products from "Grips"
View more products from "Miscellaneous"
View more products from "Miscellaneous"
View more products from "Recurve Accessories"
View more products from "Recurve Bows"

Shipping Band A (£1.92)

£7.20 ($9.61 Approx)

Similar Products
Gift Vouchers
PDF Brochure

You can download our catalogue as PDF to print or view.

Download

Secured by Sagepay