Skylon Bentwood Fletched Arrow - Single

Skylon Bentwood Fletched Arrow - Single

The Skylon Bentwood Shafts are the best option if you want some natural-looking arrows with great performance. 

• Material: 24-TON Carbon
• Inner Diameter: 6.2mm / .244"
• Straightness Tolerance: ±.005"  

Build preference: Our arrow builder allows you to make your arrows the way you want them, select your preferences from the list and the price will adjust according to your choices. We have built a compatibility table for each arrow so you will only be shown options that are compatible with the choices that you have made.

We have built a fletching charge into the cost of the shafts which is why the cost of the shafts appears higher than if you were buying them separately. 

If you wish to have these arrows fletched with Eli vanes, KSL Jet 6 vanes or Spin Wing Vanes then you can choose them from the 'cock fletch' drop-down menu and for the hen just select 'same as cock fletch' - these three fletching options come in packs of 50, any fletchings not used will be sent with the arrows as spares. Because these fletchings take a long amount of time to properly fletch we also include a fletching charge in the price of these fletchings.

You can choose from a range of options when building your arrows.

• Nocks: Bohning Signature Nock, Beiter Insert Nock 19 series or Easton X Nock.
• Points: Bohning Bullet Screw-in Points, Saunders Screw-In Points or TopHat Combo Apex 3D Screw-In Points.
• Fletchings: Trueflight Feather Fletchings.

AMO Arrow Length

When entering your required arrow/shaft length please enter the AMO length - this is the length of the arrow from the inside of the nock to the end of the shaft (Excluding the point) in inches. Please refer to the below diagram as an example.

If you already have a set of arrows/shafts you can send in one and we will use your sample arrow to set up our saw to ensure the length of the arrows match perfectly.

Nocks:

Points:

Vanes